17 March 2023
Backup of the KneeKG® Data It is important to back up KKG files regularly. The backup archive should be kept in an external location, such as: […]
14 July 2022
If you have an issue while recording the acquisition Once the calibration steps are complete, you can proceed with the “Acquisition”. In this phase, you will […]
14 July 2022
If you have an issue with the “Postural Static Alignment” calibration step. This is the last step of the calibration phase. The patient must perform a […]
14 July 2022
If you have issue with the “Knee Joint Center” calibration step This is the third step of the calibration phase. The patient must perform a flexion-extension […]
14 July 2022
Error message: The movement amplitude is insufficient. These error messages can occur during Hip Joint Center calibration or Knee Joint Center Calibration when there is not […]
14 July 2022
If you have the warning message “Warning: RMS Error on HJC Definition” This is a WARNING message meaning the calibration has been recorded but accuracy of […]
13 July 2022
If you have an issue with the “Hip Joint Center” calibration step This is the second step of the calibration phase. The patient must perform a […]
13 July 2022
If you have an issue with the “Anatomical Landmark” calibration step This is the first step of the calibration phase. You will identify four bony landmarks […]
13 July 2022
If you have the error message: “Unable To Open Port” and you are asked to enter an IP address. This occurs when in Knee3D Assessment, you […]
